 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AGILE OPTICAL COMPONENTS 10 Gb/s Dual Drive Mach-Zehnder (DDMZ) Modulator Key Features * Low differential drive voltage, typically 2 V * Matching electro-optic amplitude and phase responses * Wide optical bandwidth, compatible with full band tunable lasers * 12 GHz electro-optic (E/O) bandwidth * Single-sided electrical I/O Applications * Long reach (LR) and very long reach (VR) metro networks * Long haul (LH), ultra long haul (ULH), and submarine optical transport networks * Optical field processing for active dispersion compensation at the transceiver * Duo-binary transmission at 40 Gb/s * Bandwidth grooming The JDSU Agile Optical Components family includes modulators, switches, attenuators and tunable filters. These products provide the basis for spectrally efficient DWDM transmission utilizing dispersion tolerant modulation, channel monitoring, wavelength switching, remote power control and dynamic channel selection. They support a wide range of flexible functionalities at lower operational expenses for the Agile Optical Network. In addition, we have a complete line of tunable lasers assemblies and sub-assemblies in our Agile Transmission Module family. The 10 Gb/s Dual Drive Mach-Zehnder (DDMZ) modulator is ideally suited for use in long reach (LR) and very long reach (VR) metro network applications as well as in long haul (LH) transmission systems. DDMZ modulators have been specifically designed to yield well-behaved and matching electro-optic amplitude and phase responses over a broad RF frequency range. They are ideally suited for the processing of the optical field of a transceiver's laser. This application can be useful for active dispersion compensation. In addition, DDMZ modulators have a wide optical bandwidth. They are compatible with full band tunable lasers in either C or L band. Their low drive voltages make them compatible with low power dissipating differential modulator drivers. For mounting convenience and space efficiency, the DDMZ modulator is packaged using JDSU's compact (6-mm high) hermetic packaging technology. For transceiver integration and mounting efficiency, the entire electrical I/O is located on one side of the modulator. The RF inputs use GPO-style RF input connectors. Compliance * Telcordia GR-468 NORTH AMERICA: 800 498-JDSU (5378) WORLDWIDE: +800 5378-JDSU WEBSITE: www.jdsu.com 10 GB/S DUAL DRIVE MACH-ZEHNDER (DDMZ) MODULATOR 2 Dimensions Diagram (Specifications in mm unless otherwise noted.) 3.450 .002 87.63 0.05 .42 10.54 .73 18.54 2 PL .38 9.54 .552 .002 14.02 0.05 .19 4.72 2 PL O B .650 .005 16.51 0.13 .100 2.54 7 PL .132 .005 3.35 0.13 GPO 2.225 56.52 2 PL .598 .005 15.19 0.13 .22 5.66 GPO 2 PL R MIN .59 2 PL 15 C INPUT .14 3.49 2 PL OUTPUT .246 .004 6.25 0.1 .144 3.66 8 PL r .010 A .25 6.37 .146 2 PL 3.71 MOUNTING FOOT A 6.14 156.04 3.255 82.68 .09 2.36 DC PIN MOUNTING AREA .225 5.72 2 PL .195 4.95 2 PL 10 9 8 7 6 5 4 3 .097 2.46 2 1 .125 3.18 2 PL O .018 0.46 MOUNTING FOOT .03 0.65 .07 1.87 .78 19.74 #4-40 UNC-2B 2 PL O 900um HYTREL 150mm/125mm HYTREL LENGTH 2 PL DETAIL A 4:1 Pinout Pin 1 2 3 4 5 6 7 8 9 10 Description GPO RF port 1 GPO RF port 2 N/A N/A N/A DC bias 2 DC bias 1 GND N/A N/A 10 GB/S DUAL DRIVE MACH-ZEHNDER (DDMZ) MODULATOR 3 DDMZ Modulator Bias Circuit Diagram DDMZ S21 Electro-optic Amplitude Response Characteristics 10 GB/S DUAL DRIVE MACH-ZEHNDER (DDMZ) MODULATOR 4 DDMZ S21 Electro-optic Phase Response Characteristics DDMZ S11 Characteristics 10 GB/S DUAL DRIVE MACH-ZEHNDER (DDMZ) MODULATOR 5 Absolute Maximum/Minimum Ratings Parameter Operating temperature Storage temperature RF input power Optical input power Minimum 0 C -40 C - Maximum 75 C 85 C 24 dBm 16 dBm Specifications Parameter Wavelength Optical insertion loss1 Optical return loss S11 MZ extinction ratio RF drive voltage2 RF drive voltage DC V DC bias voltage range3 RF bandwidth Amplitude ripple S21 difference from linear phase RF timing skew Condition Minimum 1528 nm 2.5 dB 35 dB 25 dB -15 V 12 GHz -1.5 dB -1 dB -0.5 dB -0.4 dB -0.75 dB -8 -5 ps Maximum 1564 nm 5 dB -10 dB 2.6 V 0.2 V 2V +15 V 1.5 dB 1 dB 0.5 dB 0.4 dB 0.75 dB 8 5 ps Input and output ports 130 MHz - 10 GHz At 2 GHz At 2 GHz (difference between RF1 and RF2) Differential drive EOL voltage rail Linear fit (2 GHz - 15 GHz) S21 amplitude difference (300 kHz - 2 GHz) S21 amplitude difference (2 GHz - 12 GHz) RF1 to RF2 (300 kHz - 2 GHz) RF1 to RF2 (2 GHz - 8 GHz) RF1 to RF2 (8 GHz - 12 GHz) Deviation from a least squares fit line (50 MHz - 12 GHz) 1. Measured at peak of DC bias transmission with no RF input and no optical connectors. 2. Maximum driving voltage to achieve 15 dB ER for 12.5 Gb/s 231-1 PRBS signal over the operating wavelength and temperature ranges. 3. Maximum voltage range required to maintain optimum bias point over life and temperature. Mechanical Specifications Parameter RF port connector Input fiber type Output fiber type 21105245 21084655 Cabling Qualification standard Qualification document references Specification GPO connectors Fujikura PANDA-type single-mode polarization maintaining (PMF) fiber, silica, self mode stripping SM-28 Fujikura PANDA-type single-mode polarization-maintaining (PMF) fiber, silica, self mode stripping 900 m diameter loose tube Hytrel over buffered fiber Telcordia GR-468 10 GB/S DUAL DRIVE MACH-ZEHNDER (DDMZ) MODULATOR Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at customer.service@jdsu.com. Sample: 21105245-001 Code 21105245 21084655 Modulator DDMZ Dual Drive Modulator with PM input fiber, SM output fiber DDMZ Dual Drive Modulator with PM input fiber, PM output fiber Code 001 005 007 010 Connectors1 No optical connectors FC/PC input and output optical connectors SC/UPC input and output optical connectors FC/APC input and output optical connectors 1. Other connector configurations available upon request Fujikura SM 15-P-8/125-UV-400 is a trademark of Corning Incorporated. Hytrel is a registered trademark of E.I. du Pont de Nemours and Company. LC and ST are registered trademarks of Lucent Technologies. SMF-28 is a registered trademark of Corning Incorporated. Telcordia is a registered trademark of Telcordia Technologies Incorporated. All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. (c)2007 JDS Uniphase Corporation. All rights reserved. 30137423 Rev. 002 03/07 DDMZ10G.DS.CC.AE NORTH AMERICA: 800 498-JDSU (5378) WORLDWIDE: +800 5378-JDSU WEBSITE: www.jdsu.com March 2007 |
Price & Availability of 21105245-001
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |